©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD. June 2009
E & OE Instructions Part Number IN1113 Ed. E
10
Changing Flue Outlet Direction
The stove is factory assembled for top flue connection. To change to the rear flue option carefully remove
the flue spigot and the two cast iron parts of the top flue adapter (see diagram).
Refit flue spigot to the back
of the stove using the gasket
as a seal ensuring that the
choke plate is also fitted.
Fit the half moon blanking
plate, found in the bag of
installation accessories, in the
recess left by the removal of
the top flue spigot.
When connecting the flue
system to the stove, ensure
that all joints are sealed with a
suitable heat resistant sealant.
It is also recommended that a
physical retention method be
used at the flue spigot joint,
self tapping screws being
favoured, when the rear flue
option is used.
Half-Moon Top Flue
Blanking Plate
Flue spigot
Gasket
Gasket
Top flue adapter
inner cast iron plate
Top flue adapter outer cast iron
plate
Back of stove
The half-moon blanking plate is fitted into the recess
left by the removal of the top flue spigot. It and its
support bracket and screws can be found in the bag
of installation accessories supplied with the stove.
