©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD. June 2009
E & OE Instructions Part Number IN1113 Ed. E
23
Burner Removal and Replacement
The burner is held in place by two adjustable brackets, one either side of
the burner, secured by self-tapping screws.
Removal
Remove the logs from the top of the burner.
The two adjustable brackets holding in place the left and right sides of the burner need to be removed from
the stove. The retaining screws being located on the inner side panel of the stove.
Once these brackets have been removed the ceramic burner can be lifted out carefully.
Always inspect the silicon sealing washer for signs of damage or wear and replace as a matter of course
every year.
Replacement
Lift the burner back into the stove.
The two adjustable side brackets should then be replaced, these brackets should be adjusted so that the
burner is level and when the centre is pushed down there is 1 to 2mm movement, see page 24.
