©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD. June 2009
E & OE Instructions Part Number IN1113 Ed. E
13
Do not cover pilot
ignition route holes
with either ember
cubes or ember fibres.
Place fibres and cubes
to the side of this
area.
Pilot Ignition Route
Do not compress the embers or force into
position.
Placement of the Ember Glow Fibres
Platinum ember glow fibres are for use in vented gas appliances only. Platinum ember glow fibres are
made from high grade ceramic wool. The wool is similar to fibreglass and should be handled carefully. We
recommend the use of suitable dust mask, gloves or tweezers when placing the embers in position. Wash
hands immediately after touching to avoid irritation. Do not store the embers close to flammable liquids.
The embers must be placed correctly in order
to function properly. Tease out the fabric to
form loose, irregular shapes.
Use of Embers
With the embers correctly placed they glow and flicker similar to glowing ash. Their placement is important
as the effect produced can only occur when they are heated by the gas jets or by direct radiated heat. Once
the burner has been lit the embers may need adjusting to give the required effect.
The pack containing the ember glow fibres contains more than is required.
The additional embers should be kept for further service requirements.
Important:
Tease out fabric to form
loose, irregular shapes.
