©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD. June 2009
E & OE Instructions Part Number IN1113 Ed. E
24
After ensuring that the burner is level and stable using the two adjustable brackets, the burner should be
pushed downwards at a position above the supporting cup to confirm that the burner is able to compress the
sealing washer a further one or two millimetres.
The Burner Should be Level and Stable
10mm Silicon
sealing washer
Push down on the
centre of burner to
check the burner is
sitting properly on the
silicon sealing washer,
allowing 1 to 2mm
movement up and
down.
Replace the Coal or Log Effect
Follow the instructions on pages 13 to 16.
