Eurogard ServiceServer, Manual

Page: 19 / 55

Configuration options
of the ServiceServer
12
For the initial start-up or reconfiguration after a Reset, please us username/password Eurogard .
After successful Login, the Login link changes to Logout link.
Basic settings/LAN
Under this menu item you set the basic operating parameters.
Host name
The host name is the network name of the Server. It may only consist of letters, numbers and the minus
sign. This name will be included in the Server certificates and helps the VPN subscribers locate the
device in the Internet.
Default: servicerouter
Domain name
Computers are grouped into administrative units via domains.
For domain names, the same rules apply as for host names, additionally however, the full stop "."may
be used which helps with regards the structure.
Please enter the complete domain of which your Server is part of at this point. Also the domain name
is included in the certificates and helps to locate the device in the net.
Example 3.1. Host- and Domain name
Assuming you have registered with DynDNS.com under the name mein-server.dyndns.org , this
means mein-server is host name and dyndns.org is domain name.
Default: example.com
IP-Address of the Server in the LAN network
In the case where the Server’s IP address in the LAN has to be changed, this can be carried out at
this point.
IP addresses are a clear identification of computers and networks. Please make sure not to double
assign them.
IP addresses consist of a network and a host part. Any network the ServiceServer may have to access
also has to be explicitly specified.
Default: 192.168.155.1