Eurogard ServiceServer, Manual

Page: 22 / 55

Configuration options
of the ServiceServer
15
All changed settings, also in the table must be saved by clicking the "save" button in the bottom right-
hand corner.
Time source
Here you can select if the device is to receive its time settings via the network protocol NTP or if it
is to be set manually.
Please note that without regular adjustment the current device time starts to diverge.
Default: NTP
Time zone
Adjust the time zone of the device. This will allow the device to define the time difference to the
Greenwich meridian and to correct the NTP time. This will also automatically change summer and
winter time.
Default: Central Europe
Device is NTP-Server
If the device is to communicate the current time to requesting network subscribers, this menu item
should be enabled.
Default: enabled
NTP-Update interval
This configures the interval of time levelling via NTP.
Default: daily
NTP-Server chart
This chart lists the servers and ports to be used for time levelling via NTP NTP. These settings may
be changed if required, for example in order to only use already existing company servers.
dDNS
In order for the ServiceServer to be traceable by its VPN clients in the case of an Internet connection
with changing IP addresses, a provider is required who changes the reference of host-/domain names
to your IP as soon as your Internet IP changes. At this point, the Eurogard remote service products
only support the DynDNS [http://www.dyndns.com]. In the basic version, which is sufficient for most
purposes, this service is free of charge.
Caution
This service is only required if you are connected to the Internet via a regularly changing
IP address. This applies for example in the case of basic DSL connections.
In order to access this service, enter
http://www.dyndns.com
. Create an account and log in.
Now click "Add Host Services".