manualshive.com logo in svg

EUROCOM sky dlx7, User Manual

Share
Download
EUROCOM sky dlx7 User Manual Download Page 244

Interface (Ports & Jacks)

A - 4 Interface (Ports & Jacks)

A

Microphone-In Jack

Plug an external microphone in to this jack to record on your computer.

RJ-45 LAN Jack

This port supports LAN (Network) functions.

Note

: Broadband (e.g. ADSL) modems usually connect to the LAN port.

S/PDIF-Out Jack

This S/PDIF (

Sony/Philips Digital Interface Format

) Out Port allows you to connect your DVD-

capable PC to a Dolby AC-3 compatible receiver for “5.1” or ‘dts’ surround sound. External 71CH
Audio Output is supported by Headphone, Microphone, Line-In & S/PDIF Jacks (see 

“Setup for

5.1 or 7.1 Surround Sound” on page 2 - 5

).

Security Lock Slot

To  prevent  possible  theft, a Kensington-type lock can be attached to this slot. Locks can be
purchased at any computer store.

Item

Description

Summary of Contents for sky dlx7























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands