EUROCOM sky dlx7 User Manual Download Page 145

Page: 145 / 310

Modules

Overview 6 - 1

Chapter 6: Modules

Overview

This chapter contains the information on the various modules (some of which are

optional

) which may come with your computer, depending on the configuration

purchased. If you are unsure please contact your service representative.

The chapter includes information on the following:

• Setting Up SATA RAID or AHCI

Mode

• Wireless LAN Module
• Killer Network Manager
• Fingerprint Reader Module
• Bluetooth & WLAN Combo Module

• Intel® Rapid Storage Technology
• Sound Blaster Audio
• PC Camera
• Trusted Platform Module
• 3G/4G Module

Summary of Contents for sky dlx7























































































































































































































































































































Search results

Summary of Contents for sky dlx7

Reviews:

Brands by name

Popular brands

EUROCOM sky dlx7, User Manual

Search results

Summary of Contents for sky dlx7

Reviews:

Brands by name

Popular brands