EUROCOM sky dlx7 User Manual Download Page 131

Page: 131 / 310

BIOS Utilities

Main Menu 5 - 7

SATA Port # (Main Menu)

Pressing

Enter

opens the sub-menu to show the configuration of a optical Device/

HDD on the computer’s SATA Ports.

OffBoard SATA Controller Configuration (Main Menu)

Pressing

Enter

opens the sub-menu to show the configuration of any devices on the

off board SATA Controller if applicable.

System/Extended Memory (Main Menu)

This item contains information on the system memory, and is not user configurable.
The system will auto detect the amount of memory installed.

MB Series / BIOS Revision / KBC/EC firmware Revision/Mac Address (Main
Menu)

This item contains information on the BIOS version, and the identifier address for
the device on a network, and is not user configurable.

Summary of Contents for sky dlx7























































































































































































































































































































Search results

Summary of Contents for sky dlx7

Reviews:

Brands by name

Popular brands

EUROCOM sky dlx7, User Manual

Search results

Summary of Contents for sky dlx7

Reviews:

Brands by name

Popular brands