manualshive.com logo in svg

EUROCOM sky dlx7, User Manual

Share
Download
EUROCOM sky dlx7 User Manual Download Page 190

Modules

6 - 46 Intel® Rapid Storage Technology

6

Intel® Rapid Storage Technology for RAID Systems

Intel® Rapid Storage Technology

 application displays status information on your

RAID configuration. Run the 

Intel® Rapid Storage Technology

 application from

the item in the 

Start 

menu.

When the 

Intel® Rapid Storage Technology 

application

 

is launched the system

will open the 

Status 

window. Here you can view the general health of the storage

system. Various volume creation and management options are available depending
on the system’s status.

IRST and M.2 PCI-e 

SSDs

Note that Intel® Rapid
Storage Technology

does not support M.2
SSDs with a

 

PCI-e In-

terface

 (M.2 SSDs with

a SATA Interface are
supported).

Figure 6 - 29

Intel

®

 Rapid 

Storage Technology

 Status

Summary of Contents for sky dlx7























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands