manualshive.com logo in svg

EUROCOM Notebook V11.6.00, User Manual

Share
Download
EUROCOM Notebook V11.6.00 User Manual Download Page 270

AMD Video Driver Controls

C - 12 Display Devices & Options

C

Configuring an External Display In Windows 7 

1.

Attach your external display to the external monitor port/HDMI-Out port, and turn it on.

2.

Go to the 

Screen resolution

 control panel (see 

“Video Features” on page 1 - 17

).

3.

Click the 

Detect

 button.

4.

The computer will then detect any attached displays.

Function Key 

Combination

You can use the 

Fn + F7

key combination to toggle
through the display op-
tions:

• Notebook Only
• External Display Only
• No External 

Display

Make sure you give the
displays enough time to
refresh.

Figure C - 10

Screen Resolution 

Multiple Displays

(Win 7)

Summary of Contents for Notebook V11.6.00





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands