manualshive.com logo in svg

EUROCOM Notebook V11.6.00, User Manual

Share
Download
EUROCOM Notebook V11.6.00 User Manual Download Page 181

Modules

Bluetooth Module 7 - 45

7

Bluetooth Data Transfer

Note that the transfer of data between the computer and a Bluetooth enabled device is supported 

in

one direction only (simultaneous data transfer is not supported)

. Therefore if you are copying a

file from your computer to a Bluetooth enabled device, you will not be able to copy a file from the Blue-
tooth enabled device to your computer until the file transfer process from the computer has been com-
pleted.

Bluetooth Module & Resuming From Sleep Mode

The Bluetooth module’s default state will be off after resuming from the 

Sleep

 power-saving state. Use

the key combination (

Fn + F12

) to power on the Bluetooth module after the computer resumes from

Sleep.

Summary of Contents for Notebook V11.6.00





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands