EUROCOM Monster 3.0, User Manual

Page: 145 / 265

Modules
Setting Up SATA RAID or AHCI Mode 7 - 9
7
25. Press <Esc> to exit the menu.
26. Go to the
Boot menu and make sure your attached DVD drive is set as Boot
Option #1 in Boot Option Priorities .
27. Press < F4 > and <Yes> to “ Save Changes and Reset ”, however ensure that the
two conditions in the bulleted points below are met before doing so.
• Make sure the Windows 8 OS DVD is in the attached DVD drive. and as the
computer starts up it will automatically boot from the Windows 8 OS DVD (you
will be prompted to press a key to boot from the DVD).
• Make sure your USB Flash drive or external USB hard disk is attached to one of
the USB ports on the computer.
28. Press < F7 > as the computer starts up to bring up the boot device menu.
29. Select the DVD drive containing the Windows 8 OS DVD and press <Enter>.
30. Press a key at system startup to begin installing Windows from your Microsoft
Windows 8 disc.
31. Click Next > Install Now to continue installing the operating system as normal
(see your Windows documentation if you need help on installing the Windows
OS).
32. A prompt will appear to ask you to Load Driver .
Figure 7 - 5
Boot Option
Priorities (Set
Attached DVD Drive
as Option #1)