EUROCOM 888E DREAM MACHINE, User Manual

Page: 208 / 229

Troubleshooting
Display 8 - 13
8
The screen images
aren’t clear. The screen controls need to
be adjusted. Toggle the screen control key combinations Fn + F9
and F10 (see “Opening the LCD” on page 3 - 2 ).
The viewing angle of the LCD
is bad. Adjust the position of the LCD. LCDs are designed to
be viewed “straight on”. If the angle is wrong, you may
see glare from the screen’s backlight.
The screen is dirty (the
screen images are blurry). Clean the screen using a soft, clean dry cloth. Many
cleaning solutions can damage the LCD surface so
you should follow the precautions outlined in the
Preface . Try to avoid touching the screen itself. Even
the cleanest hands can leave oils which attract
contaminants.
The screen is suffering from
burn-in (the screen has ghost
images, even when it’s off). This problem is usually associated with external CRT
monitors. Use power saving options (see
“Monitor
Standby” on page 3 - 17 ) to turn off the LCD. You can
also use a screen-saver which can help protect an
attached monitor.
Problem Possible Cause Possible Solution