manualshive.com logo in svg

EUROCOM 888E DREAM MACHINE, User Manual

Share
Download
EUROCOM 888E DREAM MACHINE User Manual Download Page 151

BIOS Utilities

5 - 14 Startup Menu

5

Enable PNP OS Support (Startup Menu)

If you run a 

Windows

 OS 

other than 

Windows NT 4.0

 (e.g. 

Win-

dows 2000 

or

 XP

) this should be enabled. The setting will be “

En-

abled

” by default.

Boot and SCU Passwords (Startup Menu)

You can set the passwords for when the computer starts-up (Boot
Password), and for access to the 

SCU

 to make changes (

SCU

 pass-

word). See the sidebar for a warning on setting the password.

Other settings (Startup Menu)

The other settings in this menu allow the enabling/disabling of sys-
tem beeps at startup, and if the power is getting low.

Password Warning

If you choose to set a
boot password, 

NEV-

ER

 forget your pass-

word. 

The consequences of
this could be serious. If
you cannot remember
your boot password
you must contact your
vendor and you may
lose all of the informa-
tion on your hard disk.

Summary of Contents for 888E DREAM MACHINE






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands