User’s Manual
6-2
Preparation for a New Notebook
1.
Use a bootable floppy disk to start the system.
2.
Run FDISK utility from DOS to create a bootable partition.
(See DOS manual for the operation detail.)
3.
Format hard disk. Follow the command “Format C: /S” to create a
bootable hard disk and make the boot system files.
(C: /S copies system files to the formatted disk)
4.
Copy the file “MSCDEX.exe” from the floppy disk to drive C.
5.
Insert the disk of the CD-ROM/DVD-ROM driver. Type “Install” after the A
prompt.
6.
Restart the system.
Note 1: You can copy the CD-ROM/DVD-ROM driver from the CD-ROM disk into
a floppy disk using another computer.
Note 2: If the supplied CD-ROM/DVD-ROM driver does not offer an install
program, you can copy the driver to the drive C, and then configure the
Config.sys and Autoexec.bat files.
