EUROCOM 8500-V Super Notebook User Manual Download Page 105

Page: 105 / 128

Chapter 6. Installing Drivers

6-23

Note 1: After installing Windows NT4.0, please install the latest Service Pack

to enhance the function. Download the latest Service Pack version from the

Microsoft web site.

Installing Drivers in Windows NT4.0

Step 1: Installing the VGA Driver

Click Start.

Select Run.

Specify the path to E:\Driver\Video\Nt40\Setup.exe

Run Setup.exe.

Follow the on-screen instructions, and continue to press Next or Yes.

Click Finish to restart your computer.

Step 2: Installing the Audio Driver

Click Start.

Select Settings and Control Panel.

Double click the Multimedia icon.

Click the Devices tab.

Click Add.

Select “Unlisted or Updated Driver”, and click OK.

Choose Browse and specify the path to E:\Driver\Audio\Nt40. Press

OK.

Choose OK again.

The “Add Unlisted or Updated Driver” dialog box appears. Press OK

to install the driver.

If any “Driver Exists” dialog box appears, choose Current.

Close the Properties window and restart your computer.

Note 2: Before installing the following drivers, press F2 to enter the BIOS

Setup Utility when the computer boots. Select the Advanced menu and set

Installed O/S to “Other.” Save the changes and exit.

Summary of Contents for 8500-V Super Notebook

































































































































Search results

Summary of Contents for 8500-V Super Notebook

Reviews:

Related manuals for 8500-V Super Notebook

Brands by name

Popular brands

EUROCOM 8500-V Super Notebook, User Manual

Search results

Summary of Contents for 8500-V Super Notebook

Reviews:

Related manuals for 8500-V Super Notebook

Brands by name

Popular brands