Chapter 4. Upgrading the Computer
4-3
Replacing the FDD
1) Turn off the computer.
2) Turn the computer upside down.
3) Press the latch (
!
) and pull the floppy disk drive out of the computer
(
"
).
4) Insert the replacement drive (100/250MB Zip Drive or secondary HDD)
firmly into the computer.
Note: Because the secondary HDD that you replace FDD with is taken as
the secondary slave by the system, you need to set the HDD to “Slave” by
adjusting the HDD’s jumper. Please refer to the HDD manufacturer-supplied
instructions for appropriate jumper configuration.
