d) Link sensor to weather station
The weather station must be powered on when linking sensors. If you have multiple unlinked
sensors, they will be linked one after the other. Take the following steps on the weather station:
1. Hold down the
C
button
(B5)
until
shows in the display.
2. Press the
HISTORY/– (B8)
or
C
button to select .
- If you want to relink an individual sensor, for example after a loss of signal, select the
corresponding channel.
- Signal loss is displayed as
--.-
in the display.
3. Press the
SET (B7)
button to exit.
4. Channels are now being linked up to the weather station, one after the other. During linking
the sensor signal icon
(C3)
will show in the display for at least 3 minutes.
e) Data transmission indicator
A sensor transmits data to the weather station every 60 seconds. The indicator light
(A6)
gives
a quick flash.
10. Operation
a) Backlight
• Press the
SNOOZE/LIGHT
(B9)
button to activate the backlight for a few seconds.
• Press and hold the
SNOOZE/LIGHT
button for approx. 2 seconds to turn on the backlight
permanently.
LED ON
is displayed briefly. Press and hold the
SNOOZE/LIGHT
for approx. 2
seconds to turn the permanent backlight off again.
LED OFF
is displayed briefly.
b) Switch between outdoor sensors
• Press the
C
button repeatedly to switch between the outdoor sensors (Channels
1 - 8), and sensor scroll mode .
- Sensor scroll mode requires at least 2 sensors.
• In sensor scroll mode, the icon shows in the display and individual sensor readings will
be displayed in 5 second intervals.
c) Toggle display values
1. Press the
SET
button. The first setting flashes.
2. Press the
HISTORY/–
or
C
button to adjust setting.
52
