39
13. TROUBLESHOOTING
No reception of the signal of the outdoor sensor?
—
The distance between basis station and outdoor sensor is too large. Change the
installation site of the basis station or outdoor sensor.
—
Objects or shielding materials (metalised insulated glass windows, reinforced
concrete, etc.) interfere with radio reception. The basis station is too close to
other electronic devices (TV, computer). Change the site of the basis station.
—
The batteries of the outdoor sensor are weak or empty. Try to insert new batteries
into the outdoor sensor.
—
Always set the outdoor sensor to channel 1. The switch (17) for channel selection
is in the battery compartment of the outdoor sensor.
—
Very low outdoor temperatures (less than -20 °C) decrease battery performance.
—
A different transmitter on the same or an adjacent frequency interferes with the
radio signal of the outdoor sensor. It may be helpful to reduce the distance between
the basis station and outdoor sensor or to choose another setup site.
No DCF reception
—
Objects or shielding materials (metalised insulated glass windows, reinforced
concrete, etc.) interfere with reception. the basis station is too close to other
electronic devices (TV, computer), cables or mains sockets Change the site of the
basis station.
—
When setting up the basis station in the basement or similar, the DCF signal is too
weak and reception is therefore not possible. The same applies of the basis station
is too far away from the DCF transmitter or if the reception situation is bad.
—
Set the time manually.
