30
EN
A
Lighting mode
B
Open door alarm
C
Temperature zones concerned
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Confirmation and setting access key
H
Setting and selection keys
I
Lighting mode access and confirmation key
J
Charcoal filter meter access key
K
Standby key
L
Highest temperature in cabinet display
M
Hot circuit indicator
N
Cold circuit indicator
O
Lowest temperature in cabinet display
III-D. Temperature setting
Recommended temperature setting range for the lowest temperature: 7 - 9 °C.
Recommended temperature setting range for the highest temperature: 17 - 20 °C.
•
For the lowest temperature, the default setting is 8 °C. However you
can set the temperature between 5 - 12 °C.
•
For the highest temperature, the default setting is 18 °C.
•
However you can set the temperature between 15 - 22 °C.
N.B: in order to operate correctly, your cabinet must be
placed in a room with a temperature of 12 - 35 °C.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
7 - c
ommissioning
your
Wine
caBinet
II-D. Description (multi-temperature model S083 - S183 - S283)
3
Press the
button to confirm.
The right-hand display will flash.
4
Press the
or
keys to set the desired relative humidity
level.
5
Press the
button to confirm.
2
Press the
or
keys to set the desired temperature.
Press and hold down the
key for 5 secs to power up.
1
Press and hold down the
key for approximately 5 secs.
The display will start to flash.
N 83V2-0511.indd 30
23/06/11 11:52 AM
