29
EN
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
7 - c
ommissioning
your
Wine
caBinet
3
Press the
button to confirm.
The red serving temperature compartment temperature display
will flash.
4
Press the
or
keys to set the temperature of the red
serving temperature compartment.
5
Press the
button to confirm.
In 3-temperatur
e models, the chilling compar
tment
temperature is
determined by
the temperatur
e set in the
maturing compar
tment.
Therefore, if y
ou want to obtain a temperatur
e lower than
8 °C in the chilling compar
tment, it will be necessar
y to set
a temperature lo
wer than 12°C (a
pproximately 10°C) in the
maturing zone
.
For the red ser
ving temperatur
e zone, it is impossib
le to
obtain a temperatur
e below 17°C for models fitted with glass
doors.
•
For the maturing compartment, the default setting is 12°C (ideal
maturing temperature). However you can set the temperature between
9 - 15°C.
•
For the red serving temperature compartment, the default setting is
18°C (ideal temperature for bringing red wine to the correct serving
temperature). However you can set the temperature between 15 - 22°C.
N.B: in order to operate correctly, your cabinet must be placed in a room
with a temperature of 12 - 25 °C.
II-C. Description (3-temperature model E183 - E283)
III-C. Temperature setting
Maturing compartment recommended temperature setting range: 10 à 14 °C.
Red serving temperature compartment recommended temperature setting range: 16 à 20 °C.
2
Press the
or
keys to set the desired temperature
in the maturing compartment.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
A
Lighting mode
B
Open door alarm
C
Maturing compartment temperature zone (main
compartment of the cabinet)
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Red serving temperature compartment temperature
zone (upper compartment of the cabinet)
H
Confirmation and setting access key
I
Setting and selection keys
J
Lighting mode access and confirmation key
K
Charcoal filter meter access key
L
Standby key
M
Relative humidity level or red serving temperature
compartment temperature display
N
Hot circuit indicator
O
Cold circuit indicator
P
Maturing compartment temperature display
Press and hold down the
key for 5 secs to power up.
1
Press and hold down the
key for approximately 5 secs.
The display will start to flash.
N 83V2-0511.indd 29
23/06/11 11:52 AM
