28
EN
7 - c
ommissioning
your
Wine
caBinet
II-B. Description (2-temperature model D183 - D283)
A
Lighting mode
B
Open door alarm
C
Chilling compartment temperature zone (lower
compartment of the cabinet)
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Maturing compartment temperature zone (main
compartment of the cabinet)
H
Confirmation and setting access key
I
Setting and selection keys
J
Lighting mode access and confirmation key
K
Charcoal filter meter access key
L
Standby key
M
Humidity level alarm
N
Relative humidity level or maturing compartment
temperature display
O
Hot circuit indicator
P
Cold circuit indicator
Q
Chilling compartment temperature display
III-B. Temperature setting
3
Press the
button to confirm.
The maturing compartment temperature display will flash.
4
Press the
or
keys to set the desired temperature in
the maturing compartment.
5
Press the
button to confirm.
2
Press the
or
keys to set the desired temperature.
in the chilling compartment
Whatever the cir
cumstances, the diff
erence of the
temperature set in the chilling and maturing
compartments m
ust never be mor
e than 6 °C (e.g.
if the
chilling compar
tment is set at 6°C
, the temperatur
e of
the maturing compar
tment must not be abo
ve 12 °C).
In the same wa
y, this difference m
ust not be less than 2
°C (e.g.: if the chilling compar
tment is set at 10 °C
, the
temperature of the maturing compar
tment must not
be below 12 °C).
•
For the chilling compartment, the default setting is 8 °C (ideal chilling
temperature). However you can set the temperature between 5 - 12 °C.
•
For the maturing compartment, the default setting is 12 °C (ideal
maturing temperature). However you can set the temperature between
9 - 15 °C.
N.B: in order to operate correctly, your cabinet must be placed in a room
with a temperature of 0 - 35 °C.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
Chilling compartment recommended temperature setting range: 6 - 10 °C.
Maturing compartment recommended temperature setting range: 10 - 14 °C.
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
Press and hold down the
key for 5 secs to power up.
1
Press and hold down the
key for approximately 5 secs.
The display will start to flash.
N 83V2-0511.indd 28
23/06/11 11:52 AM