28/02/2011
7/48
The Right hand Joystick (RJ) acts like the 4 arrows of a keyboard while using the 4 directions. When
clicking centrally on this joystick it will act on a focused item like the enter button of a keyboard or
the double left click of a computer mouse.
The item displayed at the beginning of the line will be focused. For instance, if the following line is
displayed:
“goto delete view T”
and you press the right hand joystick centrally , you enter the “goto” menu.
If the following is displayed:
“delete view T”
and you press on the joystick, you enter the “delete”
menu.
In order to move back to a previous menu when navigating in a sub-menu, proceed the same way as
in the “cursor routing method” above.
NOTE: to choose among items move the right joystick forward and backward to shift the cursor from
one element to another. The prefix disappears while moving from item to item, in order to display it
again, use one of the wheels to the left direction until the beginning of the menu. The prefix will be
shown at the very beginning of the line.
In certain cases it is necessary to modify edit boxes. The symbol ”<” at the beginning means the edit
box is changeable. The ”>” symbol means the edit box is locked. To switch between the 2 symbols
press the cursor routing key above the symbol or press on the right joystick when at the beginning of
the item including the edit box.
For instance, when “name<Esys-Serial Port Device pin>0000 ok cancel” is displayed, it means you are
ready to change the name of your
esys
.
NOTE: In certain cases, some part of an edit box cannot be erased. In the example above, “Esys-“ is
not changeable but only the characters after this word.
When an edit box is opened, the default name is selected (represented blinking dot 7 and 8). In the
example above, as soon as you enter the edit box, “-Serial Port Device” will be selected. If you type a
letter at this moment, all the selected characters will be erased and replaced by the one you just
typed.
Once the new name entered, move to the next menu element and repeat the steps above.
To open or edit a file or folder, first located it on the Micro-SD card. To do so:
The root of the card is called “sdcard”. In this root, additional folders can be added directly from your
esys
(for further information, refer to the “file manager” section), or by your PC via the Explorer.
To open a file located within a folder, you must select the folder and click on it. As an example; if you
have a folder located at the root of the card called “transport” which contains 3 files named “truck”,
“plane” and “car” and you want to open or edit the “plane” file the procedure is as follows:
“sdcard>d,transport” means your cursor is placed in a position to open the “transport” folder. To
open this folder click on “transport” and “sdcard\transport>f,plane” will be displayed. To navigate
from one file to another in the “transport” folder, move the right joystick upwards or downwards.
Once the correct file is displayed move to the ok item and click on it.
If you want to return to the source folder level click on the cursor routing located above the letters
corresponding to the desired source folder. The cursor will then be placed inside this folder:
EDIT BOX PRINCIPLE:
NAVIGATE WHILE IN A TREE FOLDER STRUCTURE:
