28/02/2011
10/48
HOW TO USE
ESYS
CONNECTED VIA BLUETOOTH
Begin with synchronizing your
esys
with the target device (computer or cellphone).
To activate the Bluetooth connection on your
esys
just go inside the Bluetooth menu. The
Bluetooth of your
esys
will automatically switch on.
“Bluetooth disconnected” can be read on the Braille line. It means that the Bluetooth interface of
your
esys
is activated and other Bluetooth devices can search for it.
NOTE: When you turn your
esys
on, Bluetooth is not turned on. To start emitting signal, opening
the Bluetooth application is necessary.
With the help of the Bluetooth toolbox on the computer, execute a search for devices; you should
find the
esys
as a Bluetooth device; then, you have to pair your PC and
esys
. Note the COM port
number provided by your Bluetooth utility, this will be useful for screen reader settings. Once your
esys
is detected, enter the PIN code if one is required (the PIN code is by default ”0000”). For
further information refer to the section concerning “identification” below.
You can use the Bluetooth connection of
esys
to connect it to your mobile phone; this will work
with Symbian phones equipped with Talks and Windows Mobile, Symbian phones equipped with
Mobile Speak and Iphone.
Once the connection is established, “Bluetooth connected” can be read on the Braille line.
SYNCHRONISATION WITH COMPUTERS:
SYNCHRONISATION WITH MOBILE PHONES: