17
[image 4-4]
The electromagnet will work best on surfaces of at least 10 mm (3/8") thickness.
When the electromagnet is not able to create a good enough magnetic field, this may be caused by:
-
Surface not being flat;
-
Workpiece is not magnetisable (e.g. aluminium);
-
Workpiece is coated or painted;
-
Workpiece is not thick enough.
In this situation the magnet indicator will light up red. Make sure to solve any of these matters
before proceeding in any way and creating unsafe situations.
Using the magnet:
1.
Place and position the machine on the workpiece;
2.
To activate the magnet, press the red magnet switch:
The magnet switch will be lit (red);
The LED indicator lights up GREEN when generated magnetic force is sufficient;
3.
To deactivate the magnet, press the same switch again.
WARNING:
Do not use this machine when LED indicator is RED. Magnet may not generate
sufficient attachment force.
We want to point out that above mentioned precautions and indicators do not guarantee that the
magnet will not release from the material. Euroboor accepts no liability when it comes to the
magnet indicator not functioning or functioning poorly.
Make sure that the magnet attaches tightly to the work piece before turning on the motor unit of the
magnetic drilling machine. Euroboor magnets have two coils; make sure that both coils are in contact
with the material. Do not connect any other machine to the same electrical outlet to which the
magnetic drilling machine is plugged into, as it may result in the loss of magnetic force.
Summary of Contents for ECO.50+/T
Page 31: ...31 8 Exploded views spare parts list 8 1 Exploded views...
Page 32: ...32...
Page 33: ...33...
Page 36: ...36 8 3 Wiring diagram...
