25
5.3 Machine taps
The ECO.50+/T model is also suited for counter clockwise rotation and can therefore also be used for
cutting threads.
Proceed as follows for cutting threads:
1.
Install the tap;
[image 5-4]
2.
Drill the hole for the thread on the recommended size of the tap;
3.
Switch off the machine and change the cutter for the tap collet and the machine tap.
Do not move the machine;
4.
Select the lowest gear and lowest speed and set the direction of rotation to clockwise (right
= R);
5.
Switch on the machine and set the machine tap onto the drilled hole;
6.
Guide the machine slide down at the handle without exerting;
7.
Switch off the machine (just before the tap is completely through the hole) and set the
direction of rotation to counter clockwise (left = L).
Summary of Contents for ECO.50+/T
Page 31: ...31 8 Exploded views spare parts list 8 1 Exploded views...
Page 32: ...32...
Page 33: ...33...
Page 36: ...36 8 3 Wiring diagram...
