16
4.2 Gearbox
The exchange of the mechanical speed is done by shifting the black slider on the side of the gearbox
(image 4-2 and 4-3).
1.
To select the correct gear from neutral (horizontal) position:
a.
Slide the gear switch down, this is gear 1;
b.
Slide the gear switch up, this is gear 2.
NOTE
:
Only change the mechanical speed after the machine has come to a complete stop!
2.
Speed selection (also see plate on gearbox):
Gear 1
Ø 27-50 mm (1 1/16" - 2")
Speed: 280 rpm
Gear 2
Ø 12-26 mm (1/2" - 1")
Speed: 530 rpm
WARNING:
never touch moving machine parts!
4.3 Electromagnet
Make sure the magnetic drilling machine is placed on a smooth, clean, level and solid surface without
any objects or debris to guarantee maximum adhesion.
The workpiece must at least be 6 mm (1/4") thick for the magnet to stick and to drill safely. In case
the workpiece is between 3 mm (1/8") and 6 mm (1/4"), make sure to make a proper base to create
a good magnetic field as shown below.
[image 4-2]
[image 4-3]
Summary of Contents for ECO.50+/T
Page 31: ...31 8 Exploded views spare parts list 8 1 Exploded views...
Page 32: ...32...
Page 33: ...33...
Page 36: ...36 8 3 Wiring diagram...
