■
ALARM
<Main Menu>
<Privacy Mask>
This model of speed dome has 7 alarm input
channels and 2 output. Alarm input signal can
come from other devices such as infrared detector
and alarm output signal can go to light and DVR
etc.
<Alarm in 1 ~ Alarm in 7>
Channel 1 has the highest priority and channel 7
has the lowest priority. Set the alarm input and the
dome’s corresponding action. Following options are
applicable.
[Off] Disable the alarm input (default )
[Pre 001~220] Call preset 001~220
[Scan 001~004] Run auto scan 001~004
[Tour 001~004] Run tour 001~004
[Pat 001~004] Run pattern 001~004
NOTE: There are two alarm output methods: NO
and NC, refer to Appendix I for setting details.
For example:
In this example, when the first alarm is activated,
the dome will run preset-100; when the second
alarm is activated, the doom will run pattern-3;
when the third alarm is activated, the doom will
run scan-2; When the fourth alarm is activated, the
doom will run tour-1.
ALARM OUT 1,2 Alarm out relays the alarm
input signal to other devices. e.g. light and DVR.
Change the option to switch the alarm output ON
or OFF. Default setting is OFF
<Arm/Disarm>
Arm or disarm the alarm system and show the
status.
<Interval >
Set the time after which the
alarm will be reset. Values are in second unit,
default setting is 4.
[001~255] Reset within the number of seconds.
<Back>
Back to main menu.
EVC-TP-SO453ARW, EVC-TP-SO448AN
www.eurovideo-cctv.com
- 38
-
Alarm in 1: Off
Alarm in 2: Off
Alarm in 3: Off
Alarm in 4: Off
Alarm in 5: Off
Alarm in 6: Off
Alarm in 7: Off
Relay 1: Off
Relay 2: Off
Arm/Disarm: Armed
Interval: 030
Back
Alarm in 1 : Pre. 001
Alarm in 2 : Pat. 003
Alarm in 3 : Cru. 002
Alarm in 4 : Tour 001
Alarm in 5 : Off
Alarm in 6 : Off
Alarm in 7 : Off
Relay 1 : Off
Relay 2 : Off
Arm/Disarm: Arm
Interval <S>: 004
Back
