Euro Video EVC-TP-SO448AN Instruction Manual Download Page 21

Page: 21 / 51

■

ACCESSING MAIN MENU

Display the dome’s main menu on your monitor
by calling preset 95 or calling preset 1 twice within
5 seconds.

Note: For third party keyboard controller please
read manuals. As command to a preset may not
be the same among different manufacturers.

In case password protection is in effect, user needs
to input the correct 6-bit password to enter the
OSD menu. (Default password is 123456).

To enter password, move the joystick up or down
to select number (0-9), move the joystick left or
right to choose password digit. If the input
password is wrong, the password input window
will disappear.

OSD menu will close automatically after 1 minute
without any operation. All the settings will be
saved automatically to protect against power
outage.

EVC-TP-SO453ARW, EVC-TP-SO448AN

www.eurovideo-cctv.com

- 21

Summary of Contents for EVC-TP-SO448AN




















































Search results

Summary of Contents for EVC-TP-SO448AN

Reviews:

Related manuals for EVC-TP-SO448AN

Brands by name

Popular brands

Euro Video EVC-TP-SO448AN, Instruction Manual

Search results

Summary of Contents for EVC-TP-SO448AN

Reviews:

Related manuals for EVC-TP-SO448AN

Brands by name

Popular brands