Euresys 1630 Coaxlink Mono, Hardware Manual

Page: 155 / 234

155
AC characteristics
Parameter Conditions Min. Typ. Max. Units
Positive pulse width 10 µs
Negative pulse width 10
Pulse rate 0 50 kHz
Turn-ON delay
1
30°C; 50 kHz; 2 V square wave signal
LineFilterStrength = Lowest
( LineFilterDelay = 500 ns)
6.9 µs
Turn-OFF delay
2
9.8 µs
NOTE
1. The "Turn-ON" delay is defined as the time difference between a transition
of state at the input that turns ON the opto-coupler and the subsequent
transition in the FPGA.
2. The "Turn-OFF" delay is defined as the time difference between a
transition of state at the input that turns OFF the opto-coupler and the
subsequent transition in the FPGA.
These delays include the delay introduced by the digital line filter controlled
by the
LineFilterStrength GenApi feature!
Isolation characteristics
Parameter Value
Isolation grade Functional
Max. DC voltage 250 V
Max. AC voltage 170 V
RMS
NOTE
The functional isolation is only for the circuit technical protection. It does not
provide an isolation that can protect a human being from electrical shock!
Logical map
The state of the port is reported as follows:
Input current Logical State
I
IN
> 1 mA HIGH
I
IN
< 1 mA LOW
Unconnected input port LOW
Coaxlink Hardware Manual