6
WARNING!
Do not make any wire modification while the unit is connected to the power. Failure
to observe this precaution could result in damage to this device! Before installation
or disassembling the unit, disconnect the power supply first!
Practical tips for mounting the camera module
Avoid places where the camera lens is exposed to the direct light (sun, reflections,
street lighting), because this may cause malfunction and weaken the visibility.
Other mounting methods
The manufacturer does not recommend other than described in this manual installa-
tion methods, but qualified installers may make the necessary changes.
3. WIRING DIAGRAM
Fig. 10 shows the wiring diagram of: outdoor unit with camera, indoor unit, electric-
-lock, optional outdoor gate and power supply.
Fig.8
Fig.9
To properly install outdoor station:
1.
Unscrew the lower fixing screw and separate
the outdoor unit from the rain cover.
2. With 3 holes in the bottom of the protective
roof, uncheck on the wall the places for moun-
ting pins (fig 9).
3. In the marked places, drill 3x Ø5mm mounting
holes and place there 3 fixing pins (fig. 9).
4. Using 3 mounting screws, secure the rain co-
wer to the wall (fig. 9).
5. Connect to the unit 4-wire from the monitor
(fig. 9).
6. Place the outer module cassette in the previo-
usly secured rain cover and tighten the bottom
fixing screw, in a way not to destroy the inter
-
nal elements.
Fig.10
