background image

10

BEFORE YOU CALL - TROUBLE SHOOTING

No Picture / Signal

Solution

No Picture / Signal

- Make sure all the connection are secure and 

properly connected.

- Make sure your monitor is plugged into a po-

wer source.

- Make sure there is nothing obstructing the 

view of the camera.

No Picture, but intercommunication is 

normal

- Make sure all the connection are secure and 

properly connected.

- Make sure there is nothing obstructing the 

view of the camera.

No audio when calling

- Make sure the volume noch on the indoor 

unit is tuned up.

- Make sure there is nothing interfering with 

the speaker or microphone on the indoor unit 

or the camera.

- Make sure all the connections are secure and 

properly connected.

The outdoor unit cannot call the indoor one

- Make sure all the connections are secure and 

properly connected. 

No one can hear me outside but I can hear 

them when calling

- Press TALK key for two-way intercom.

- Make sure all the connections are secure and 

properly connected.

No one can hear me outside but I can hear 

them when monitoring

- Press TALK key for two-way intercom, since 

simple touch MONITOR allows you to see and 

hear outside but prevents the outside from 

hearing you.

- Make sure all the connections are secure and 

properly connected.

w

Summary of Contents for VDP-22A3 PLUTON G














Reviews: