4
2. INSTALLATION
CAUTION!
Recommended length and cross-sections of cables connecting both modules:
0 - 50m
4x0.5mm
2
50m - 100m 4x0.75mm
2
The connection to the electromagnetic bolt should be
carried out by 2 x 1 mm2 cable, similar to the connection to
the optional gateway automat. The optimum solution will
be to use one 4-wire connecting the monitor to the external
module, one 2-wire cable connecting the monitor to the electromagnetic lock and one
2-wire cable connecting the monitor to the gateway automat. If you have other
connection wires than the recommended one, then you are allowed to use them, but
you must test the wiring to verify that it works.
2.1. INDOOR MONITOR INSTALLATION
To properly install indoor monitor you should:
1.
Use the screws to fix the Mounting Bracket on the mounting box (fig. 2a), in a way
that provides easy and aesthetic connection for the power cord and connection wi-
res. The standard height at which the monitor screen should be stand on the frame
is approximately 145cm, but its position can be adjusted to the individual needs of
the user.
2. Connect the system wiring according to the graph presented in fg. 10.
3.
Connect the power cord (fig. 2) from the delivered power supply.
OUTDOOR VIDEO
DOORPHONE CONSTRUCTION
1. Camera
2. Speaker
3. LED light
4. Call button
5. Microphone
6. Mounting holes
7. Connection terminal
8. Rain shade
Fig.5
Fig.6
Fig.7
