Euphonix Max Air, Operation Manual

Page: 55 / 188

Euphonix Max Air Mixing Console Operation Manual Touchscreen
55
Max Air must be initially setup so that all the studio equipment is displayed and cor-
rectly labelled and normalled ready for a session. This basic wiring information is
stored in the Default Title so these settings can be used when starting a new session with
a new Title. To setup Max Air studio wiring, see Chapter 3:
Quickstart to Common
Tasks .
Select Patch from the Main Menu buttons. The Patch View has four categories repre-
sented by tabs on the bottom of the screen: Console I/O , Destinations , Sources , and
Cabling .
4.3.1 Destinations and Sources
Figure 4-11 shows that sources and destinations refer to the Max Air console. Sources
are signals sent to the console (i.e., signals from the analog to MADI and digital to
MADI converters, microphones, tape/VTR outputs). Destinations are signals sent from
the console (i.e., signals sent to the MADI to digital converters, VTR inputs).
Figure 4-11 Sources and Destinations with respect to Max Air
If you have purchased an SH612 Studio Hub, there are up to 12 MADI device input
ports and 11 MADI output ports on the console, each carrying up to 56 channels. If you
do not have a Studio Hub, there are four MADI input ports and three MADI Output
ports available.
4.3.2 Console I/O
Select the Console I/O tab on the bottom of the Patch View, then select the A and B
Inputs sub-category on the left (Figure 4-12). This is where connections to the channel’s
A and B inputs are made. Touch the Name field (1 in Figure 4-12) and type a name for
a channel.
Touch and drag through the A Input cells (2 in Figure 4-12) for which you would like
to assign. Figure 4-12 shows the result of selecting the A Input cells for channels 1–5.
Note that the channel names appear in the
Destinations column (3 in Figure 4-12) in
the Selected Sources and Destinations area. The numbered tabs (4 in Figure 4-12) dis-
play additional pages of patchpoints.
Sources
Max Air Console Destinations