EUPA VXZA, User Manual

Page: 27 / 64

Hardware Installation
2-16
Each IDE channel, either Primary or Secondary, supports two IDE devices
which must be set differently to master mode and slave mode. (Refer to your
hard disk and CD-ROM user manual for detailed settings of IDE master and
slave mode.)
IDE1
IDE2
9. IDE Hard Drives Connector
Connect your IDE devices to the 40-pin IDE connectors onboard marked as
IDE1
and
IDE2
.
10. AMR & AC97Connectors: JP5
JP5 1-2 3-4
AC97 Enabled Disabled
AMR Disabled Enabled
JP5
1
4
Connect the AMR card to the onboard AMR connector marked as
JP5
.
According to the following table, sets JP5 jumper.