EUPA VXZA, User Manual

Page: 17 / 64

Hardware Installation
2-6
CPU Host Clock (CPU/PCI)
Default....................( )
100/33 MHz..............( )
103/34MHz.................( )
112/37MHz.................( )
124/41MHz...................( )
Frequency / Voltage Control
Auto Detect DIMM / PCI Clk
Spread Spectrum.
CPU Host Clock (CPU / PCI) Enabled
Disabled
Default
Item Help
Menu Level
!
Enter: Select F5 : Previous Values +/-/PU/PD: Value F10: Save
F6 : Fail-safe defaults Esc:Exit F1: General Help F7 : Optimized Defaults
CPU Host Clock (CPU/PCI)
Default....................( )
66/33 MHz..............( )
75/37.5MHz.................( )
83/41.7MHz.................( )
2. If your CPU is 100MHz clock frequency (FC-PGA Coppermine & VIA
CyrixIII) , you may select CPU host clock from the BIOS for over-clock.
1. If your CPU is
66MHz clock frequency (Celeron)
, you may select CPU
host clock from the BIOS for overclock.
Auto Detect DIMM / PCI Clk
Spread Spectrum.
CPU Host Clock (CPU / PCI) Enabled
Disabled
Default Item Help
Menu Level
!
Enter: Select F5 : Previous Values +/-/PU/PD: Value F10: Save
F6 : Fail-safe defaults Esc:Exit F1: General Help F7 : Optimized Defaults
If you
decide to make 66MHz CPU over-clock to 100MHz CPU, you may set
JP19 pin 3-4 short as following:
Frequency / Voltage Control
Caution!!
Frequencies above 100MHz exceed the specifications
for the CPU and are not guaranteed to be stable and
results in damanging your peripheral devices.