EUPA VXZA, User Manual

Page: 12 / 64

Chapter 2
Hardware Installation
This chapter gives you a step-by-step procedure on how to install your system and
set jumper. The motherboard has several user-adjustable jumpers on the board that
allow you to configure your system to suit your requirements.
Cautions:
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside your system. To prevent static
damage, discharge static electricity from your body before you touch any of your
motherboard electronic components,such as the microprocessor.Observe the follow-
ing precautions:
- Do not removes the motherboard from its anti-static packaging until you
are ready to install it into a computer case.
- Before you handle the motherboard in any way, touch a grounded, antistatic
surface, such as an unpainted portion of the system chassis, for a few
seconds to discharge any built-up static electricity.
- Handle add-in cards and modules by the edges or mounting bracket.
2-1