EUCHNER MGBS-P-L AP Series, Operating Instructions Manual, Page: 30 / 40

Operating Instructions
Safety System MGBS-P-L.-AP…
30
(translation of the original operating instructions) 2527245-02-01/22
14. Technical data
NOTICE
If a data sheet is included with the product, the information on the data sheet applies.
14.1. Technical data for safety switch MGBS-AP
Parameter
Value
Unit
min. typ. max.
General
Material
- Switch head Die-cast zinc
- Switch housing Reinforced thermoplastic
Installation orientation Any
Degree of protection with plug connector M12 IP67/IP69/IP69K
with plug connector M23 IP67
(screwed tight with the related mating connector)
Safety class acc. to EN IEC 61558 III
Degree of contamination 3
Mechanical life 1 x 10 6 operating cycles
Ambient temperature at UB = 24 V -20 - +55 °C
Handle module approach speed, max. 20 m/min
Actuating/extraction/retention force at 20 °C 10/20/20 N
Locking force F
max
1)
3,900 N
Locking force F
Zh 1)
acc. to EN ISO 14119 F
Zh
= F
max
/1.3 = 3,000 N
Weight Approx. 1.5 kg
Connection (depending on version) 2 plug connectors M12, 5- and 8-pin / 1 plug connector RC18, 19-pin / 1 plug connector
M12, 8-pin
Operating voltage UB (reverse polarity protected, regulated,
residual ripple < 5%)
24 ± 15% (PELV) V DC
Current consumption I
UB
40 mA
The following applies to the approval acc. to UL Operation only with UL Class 2 power supply or equivalent measures
Switching load acc. to UL DC 24 V, class 2
External fuse (operating voltage UB) 2) 0.25 - 8 A
External fuse (solenoid operating voltage IMP)
2)
0.5 - 8 A
Rated insulation voltage U
i
- - 50 V
Rated impulse withstand voltage U
imp
- - 0.5 kV
Rated conditional short-circuit current 100 A
Shock and vibration resistance Acc. to EN 60947-5-3
EMC protection requirements Acc. to EN 60947-5-3
Ready delay - - 1 s
Risk time - - 260 ms
Turn-on time - - 400 ms
Discrepancy time - - 10 ms
Test pulse duration 0.35 ms
Frequency band 120 … 130 kHz
Safety outputs FO1A/FO1B Semiconductor outputs, p-switching, short circuit-proof
Output voltage U
FO1A
/U
FO1B
3)
V DC - HIGH U
FO1A
/U
FO1B
UB - 1.5 - UB
- LOW U
FO1A
/U
FO1B
0 - 1
Switching current per safety output 1 - 150 mA
Utilization category acc. to EN 60947-5-2 DC-13 24V 150 mA
Caution: outputs must be protected with a free-wheeling diode in case of inductive loads
Switching frequency 4) 0.5 Hz