EUCHNER MGBS-P-L AP Series, Operating Instructions Manual, Page: 27 / 40

27
2527245-02-01/22 (translation of the original operating instructions)
Operating Instructions
Safety System MGBS-P-L.-AP…
EN
12. Setup
12.1. LED displays
You will find a detailed description of the signal functions in chapter 13. System status table on page 29.
LED Color
STATE green
LOCK yellow
DIA
red
12.2. Teach-in function for handle module (only for unicode evaluation)
The handle module must be assigned to the locking module using a teach-in function before the system forms a functional unit.
During a teach-in operation, the safety outputs are switched off, i.e. the system is in the safe state.
The teach-in operation is fully automatic. The number of possible teach-in operations is unlimited.
Tip!
Prior to switching on, close the guard on which the handle module to be taught-in is installed. The
teach-in operation starts immediately after switching on. This feature simplifies above all teach-in with
series connections and on large installations.
Important!
Ì The teach-in operation can be performed only if the device does not have any internal fault.
Ì Devices in the condition as supplied remain in the teach-in standby state until you have successfully
taught-in the first handle module. Once taught-in, locking modules remain in the teach-in standby state
for approx. 3 min. after each switch-on.
Ì The locking module disables the code for the previous handle module if teach-in is carried out for
a new handle module. Teach-in is not possible again immediately for this device if a new teach-in
operation is carried out. The disabled code is released again in the locking module only after a third
code has been taught-in.
Ì The locking module can be operated only with the last handle module taught-in.
Ì If, in the teach-in standby state, the locking module detects the handle module last taught-in, the
teach-in standby state is ended immediately and the locking module changes to the normal state.
Ì The handle module to be taught-in is not activated if it is within the actuating range for less than 30 s.
LED
STATE
LOCK
DIA