MR-900T User Manual
35
Figure Appendix 1-4: 4G router's network connection status
2.
Multiple PCs share internet access via MR-900T
Figure Appendix 1-5: Multiple PCs share internet access
Steps:
（
1
）
Connect MR-900T to the up-link of a switch/hub with a cross Ethernet cable,
and the PCs sharing internet access connect to the down-link of switch/hub
with Ethernet cables.
（
2
）
Configure IP address as "automatically obtain IP address" or set IP address
manually (as shown above).
（
3
）
Plug a USIM card(for example, China Mobile and) with internet service into
MR-900T, then after power on, MR-900T will dial automatically; and after
dialing is successful, you can browse webpage, and send/receive emails via
PC. The dialing status of MR-900T can be checked in the web interface. Just
Summary of Contents for MR-900T
