28937-01A
1
nstallation
Unpacking and Inspection
The bench and canopy are each wrapped
in plastic. Pull back the plastic and, with
a helper, grasp the canopy and pull it from
the carton bottom, leaving the plastic
wrap and the carton packaging. Do the
same for the bench.
Do not attempt to lift
either unit with the plastic still on as it
may slip. Do not lift the canopy by its
plastic endcaps.
The ballast tray is secured
to the carton bottom with brackets.
Remove these brackets from the ballast
tray with a Phillips screwdriver.
Note! The cartons are reusable. You may
wish to save them for future use.
After unpacking the unit, check to make
sure you have received the following:
• Canopy unit
• Bench unit
• Ballast tray
• Metal access panel
• Long metal hinge cover panel
• Two large endcaps
• Body fan (in a box)
• Bag containing necessary assembly
hardware, safety goggles, and pillow.
Inspect these items, including the canopy
and bench, to make sure they are free
from any visible damage. Report the
extent of any damage to the transportation
company.
Record the serial number of the unit in the
area provided at the back of this manual.
This information will be required whenev-
er you call customer service.
Tools Required
You will need the following tools to
assemble your sunbed.
#2 Phillips Screwdriver
Adjustable Wrench
9/16” Wrench
5/16” Allen Wrench
(included in the hardware kit)