Precautions
MODEL 2081 TURNTABLE SERIES
4
© ETS-LINDGREN L.P. – JANUARY 2003
REV D – PN 399212
EUT Power Outlets:
Receptacles are usually mounted on the base
of the turntable at its center axis point. These receptacles can be
custom mounted, flush with the tabletop on some turntables.
Consult the factory for more details.
Mounted LISNs:
LISNs can be mounted to the underside of some
turntables. This option is only practical on larger turntables with
sufficient clearance.
PRECAUTIONS
Read this manual completely before starting installation. This
equipment should be installed and operated only by qualified
personnel.
Ensure correct voltage setting is selected on the Motor Base unit
(when applicable).
The fiber optic cable must be looped through the “P” clip installed
on the front panel of the motor base. Failure to do so will increase
the chance of the cable being accidentally pulled, thus breaking the
fiber optic connectors.
Do not attempt to service unless qualified to do so. As with any
electrical equipment, ensure unit electrical power has been
disconnected and secured when performing scheduled maintenance
or adjustments.
Do not make any modifications to this unit without consulting the
factory directly.
Stay clear of all moving components on this equipment.
Do not, at any time, place hands or feet in the vicinity of the drive
pinion on the turntable.
Do not operate the turntable while someone is physically on the
turntable top.
WARRANTY
Archived 3/18/10
