requested –if you plan to use EtroLink™ based device recovery on
Windows 98, please prepare one in advance)
l
NO Software installation Required
There is no requirement of installation or setup of any software on Windows
XP/2000 platforms.
l
Steps for Using EtroLink™ Config Port (
Windows XP OS
)
1.
Unplug
the power cable
from the IP camera.
2.
Connect EtroLink™ and PC via the mini USB cable.
3.
After 5 ~ 10 seconds, the “
Disk drive
” will be detected. The
detecting speed is determined by the processing speed of your PC.
4.
A POP-UP dialog indicates “
Config Wizard
” being ready to run.
Please press OK.