Etrel INCH LITE, Quick Start Manual

Page: 4 / 12

2 | 10
I N T E N D E D U S E
•
Etrel INCH LITE charging station is intended only for
charging of electric vehicles and should not be used
to charge other appliances or for any other
purpose.
•
The manufacturer accepts no responsibility for
damage or injuries resulting from incorrect
installation or inappropriate use.
I N S T A L L A T I O N A N D M A I N T E N A N C E
•
Do not install charging station near flammable,
explosive, or combustive materials.
•
Charging station installation must be performed in
dry weather conditions.
•
Electrical installation, wiring, and connections
must be carried out by qualified electrician or
technician in accordance with all local electrical
codes, legislation, and ordinances.
•
Warning! Before installing and wiring the
charging station, make sure that the power
supply is disconnected: remove fuses or
deactivate the circuit breaker to protect from
unintentional powering of the device.
•
Charging station can be installed, maintained, and
repaired by qualified personnel only.
•
Charging station’s power supply should always be
switched off during the maintenance and repair.
•
Avoid hazardous risks. Only the manufacturer, an
authorized service technician, or technically
qualified personnel may replace damaged charging
station or its components.
O P E R A T I O N
•
Do not operate your charging station if there is
visible damage to the unit or charging cable. Call
manufacturer’s or reseller’s support department
for advice how to proceed.
•
Do not put fingers into the charging connector.