10 | 10
Each short press on the key increments the maximal
charging current by 2 A, from value of 0 A. E.g., to set
24 A, the key should be pressed 12 times. Most vehicles
require at least 6 A to charge and a lower value setting is
not allowed.
To save the settings, press the key for more than 5 s.
Long beep is a confirmation that settings were saved,
two short beeps are a warning that settings were not
saved.
12
12-a
Power up the Charging Station for the First Time
First boot of the charging station can last up to 10
minutes. Make sure that the status light is lit in solid
green. This means that the charging station is ready to
charge an EV.
For more documentation and troubleshooting, please visit
https://etrel.com/charging-solutions/inch-lite/
www.etrel.com
Etrel d.o.o.
Pod jelšami 6, 1290 Grosuplje, Slovenia
2020 Etrel. All rights reserved. Etrel, the Etrel logo and other marks are
owned by Etrel and may be registered. All other trademarks are the
property of their respective owners. Etrel assumes no responsibility for
any errors that may appear in this manual. Information contained herein is
subject to change without notice.
WEEE: Dispose of the device only at the
recycling centre.
Summary of Contents for INCH LITE
Page 1: ...Ver 2020 08 EN Etrel INCH LITE QUICK START GUIDE EN...
Page 2: ......
