ETOP SHB-E18, User Manual

Page: 72 / 86

64 SHB-E18 User`s Manual
3.7 PnP/PCI Configuration
This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system which allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended
that only experienced users should make any changes to the default
settings.
Phoenix-Award BIOS CMOS Setup Utility
PnP/PCI Configuration
Init Display First [PCI Slot]
Reset Configuration Data [Disabled]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter
PCI/VGA Palette Snoop [Disabled]
INT Pin 1 Assignment [Auto]
INT Pin 2 Assignment [Auto]
INT Pin 3Assignment [Auto]
INT Pin 4 Assignment [Auto]
INT Pin 5 Assignment [Auto]
INT Pin 6 Assignment [Auto]
INT Pin 7 Assignment [Auto]
INT Pin 8 Assignment [Auto]
**PCI Express relative items**
Maximum Payload Size [128]
Item Help
Menu Level
►
↑↓← → ： Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit F1:General Help
F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
Init Display First
This item allows you to choose which one to activate first, PCI Slot or
onchip VGA.
The choice: PCI Slot
(default) , Onboard, PCIEx.