ETOP SHB-E18, User Manual

Page: 51 / 86

SHB-E18 User`s Manual 43
Boot Other Device
When enabled, BIOS will try to load the operating system from other
device when it failed to load from the three devices above.
The choice: Enabled
(default) , Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose "Enabled" to assign
physical drive B to logical drive A and vice-versa.
The choice: Enabled, Disabled
(default) .
Boot Up Floppy Seek
Selection of the command ‘Disabled’ will speed the boot up.
Selection of ‘Enabled’ Searches disk drives during boot up.
The choice: Enabled
(default) , Disabled
Boot Up Num Lock Status
Selects power on state for Num Lock.
The choice: On, Off
(default) .
Gate A20 Option
The choice:
Normal: A pin in the keyboard controller controls GateA20.
Fast
(default) : Lets chipset control GateA20.
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be
selected.
The choice: Enabled, Disabled
(default) .
If Typematic Rate Setting is [Enabled], can choice Rate and Delay: