ETOP SHB-E18, User Manual, Page: 53 / 86

SHB-E18 User`s Manual 45
Security Option
Select whether the password is required every time the system boots
or only when you enter setup.
System The system will not boot and access to Setup will be
denied if the correct password is not entered at the
prompt.
Setup The system will boot, but access to Setup will be
denied if the correct password is not entered at the
prompt.
(default)
Note: To disable security, select PASSWORD SETTING at Main Menu
and then you will be asked to enter password. Do not type anything
and just press <Enter>, it will disable security. Once the security is
disabled, the system will boot and you can enter Setup freely.
APIC Mode
This setting allows to enable the APIC mode.
The choice: Enabled
(default) , Disabled.
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor
specification.
Select version supported by the operation system running on this
computer.
The choice: 1.1, 1.4
(default) .
OS Select For DRAM > 64MB
Select OS2 only if you are running OS/2 operating system with
greater than 64MB of RAM on the system.
The choice: Non-OS2
(default) , OS2.
Report No FDD For WIN 95
The choice: No (default) , Yes.