ETOP SHB-E18, User Manual, Page: 69 / 86

SHB-E18 User`s Manual 61
Suspend Mode
This field specifies the length of time of system inactivity while in full
power on state before the computer enters suspend mode and
motivates the enable 'Wake up Events in Doze & Standby' / 'PM
Events'.
The choice: 1Min, 2Min, 4Min, 8Min, 12Min, 20Min, 30Min,
40Min,1Hour, Disable
(default) .
HDD Power Down
When enable and after the set time of system inactivity, the hard
disk drive will be powered down while all other devices remain
active.
The choice: 1Min, 2Min, 3Min, 4Min, 5Min, 6Min, 7Min, 8Min, 9Min,
10Min, 11Min, 12Min, 13Min, 14Min, 15Min, Disable
(default) .
Soft-Off by PWR-BTTN
This field defines the power off mode when using an ATX power
supply.
The choice: Instant-Off, Delay 4 Sec.
Instant-Off
Press power button then Power off
instantly .
(default)
Delay 4 Sec Press power button 4 sec. to Power off. Enter
suspend if button is pressed less than 4 sec.
CPU THRM-Throttling
This field allows you to select the CPU THRM-Throttling rate.
The choice: 75.0%, 50.0%
(default) , 25.0%.
Wake-Up by PCI card
Enable/Disable PCI PME wake up function.
The choice: Enabled
(default) , Disabled.
Power On by Ring
Enable/Disable Power on by Ring function.
The choice: Enabled
(default) , Disabled.